上海迪安电工器材有限公司

PRODUCTS

Enameled wire tester

ELECTRICAL RESISTANCE TESTER

ELECTRICAL RESISTANCE TESTER
ZLD-10

Performance Characteristics of Product

Executive standard: GB/T4074.5-2008/IEC60851-4; Inspection standard: JB/T4279.2-2008

Used to measure conductor with nominal diameter ≥0.01～9.0mm or various round or flat copper and aluminum wires and other metal wires with DC current resistance of 100μΩ～99.99Ω;

Combination of intelligent DC conductor resistance measuring meter and DC resistance test fixture with sample straightening function;

Test range can be selected according to the resistance value of sample, and after clamping samples current resistance value would be displayed;

Both potential fixture and current fixture are made of copper;

The application of microcomputer control allows for full-automatic completion of test;

LED will intuitively display measurement results;

Major Technical Parameters

Length measurement (space between two potential fixtures)	1000±1mm
Space between potential fixture and adjacent current fixture	50mm
Knife-edge width of potential fixture	1.8±0.2mm
Resolution	1μΩ
measurement range and accuracy	100μΩ～99.99Ω±0.5%
Input power	AC220V±10% 50Hz
Consumed power	＜30W
Overall dimensions	L×W×H 1380×265×290mm
Weight	25kg